Quality Parameter	Measure Unit	Limit Value E DIN 51605	Test Method
Density(15 °C)	Kg/m3	900-930	DIN EN ISO 12185
Flash Point P.-M.	°C	Min. 220	DIN EN ISO 2719
Cinematic Viscosity(40 °C)	mm2/s	max. 36,0	DIN EN ISO 3104
Lower cloric value	Kj/kg	36.000	DIN 51 900-2
Cetane Number	./.	min. 39	IP 498
Carbon Residue Mass	n.C. % (m/m)	max. 0,40	DIN EN ISO 10370
Iodine Number	g Jod/100g	95-125	DIN EN 14111
Sulphur Content	mg/kg	max. 10	DIN EN ISO 20884
Contamination	mg/kg	max. 24	DIN EN 12662
Erucic Acid Value	mg KOH/g	max. 2,0	DIN EN 14104
Oxidation Stability110 °C	h	min. 6,0	DIN EN 14112
Phosphorus Content	mg/kg	max. 12	DIN EN 14107
Content of alkaline earth Metals (Ca+Mg)	mg/kg	max. 20	E DIN EN 14538
Oxid Ash Content	% (m/m)	max. 0,01	DIN EN ISO 6245
Water Content K.-F.	mg/kg	max. 750	DIN EN ISO 12937

Fatty Acids Composition

FATTY ACIDS	STRUCTURE	REFERENCE VALUES (%)
Palmitic Acid	C16:0	7,0 – 14,0
Stearic Acid	C18:1	19,0 – 30,0
Linoleic Acid (Omega 6)	C18:2	44,0 – 62,0
Linolenic Acid (Omega 3)	C18:3	4,0 – 11,0

Indexes	Measure Unit	Values
Specific Weight (25?C)	g/c m?	0,9180 – 0,9225
Refractive Index (25?C)	-	1,470- 1,4760
Iodine	g I2 / 100g	120 – 143
Saponification Value	mg KOH/g	188 – 198
Unsaponifiable Matter	%	< 1,5%
Carbon Residue Mass	n.C. % (m/m)	max. 0,40
Acidity	g Oleic Acid/100g	< 2,0
Peroxide Value	meq/kg	< 10,0
Contamination	mg/kg	max. 24
Phosphorus	-	0,1%
Color (Lovibond)	-	Yellow 60 / Red 6
Heating Loss (Volatile)	-	0,2%
Sediment	-	0,3%
Halphen Reaction	-	Negative

Benchmarks: RDC n° 482 of 09.23.1999, the Brazilian National Agency of Sanitary Surveillance-ANVISA